Timber
Book Chapter
Cramer, M., & Tamagnone, G. (2024)
Timber. In H. Hartman, & J. Jack Williams (Eds.), Materials: An environmental primer (230-253). RIBA
Exploring the Use of Rock Flour for Sustainable Peat Stabilisation
Conference Proceeding
Bernal-Sanchez, J., Coll, J., Leak, J., & Barreto, D. (2024)
Exploring the Use of Rock Flour for Sustainable Peat Stabilisation. In Geo-Congress 2024: Soil Improvement, Sustainability, Geoenvironmental, and Cold Regions Engineering (450-460). https://doi.org/10.1061/9780784485330.046
This paper aims to investigate the mechanical behaviour of peat stabilised with glacial rock flour for foundation construction. Peat, a natural organic soil, presents challeng...
Effective and Fast-Screening Route to Evaluate Dynamic Elastomer-Filler Network Reversibility for Sustainable Rubber Composite Design
Journal Article
Xia, T., Wemyss, A. M., Salehiyan, R., Heeley, E. L., Hu, X., Tang, F., …Wan, C. (2023)
Effective and Fast-Screening Route to Evaluate Dynamic Elastomer-Filler Network Reversibility for Sustainable Rubber Composite Design. ACS sustainable chemistry & engineering, 11, 17857-17869. https://doi.org/10.1021/acssuschemeng.3c06752
The introduction of self-healing and reprocessability into conventional vulcanized rubbers has been recognized as a promising strategy to promote elastomer circularity. Howeve...
Facilitators and benefits of implementing lean premise design: A case of Hong Kong high-rise buildings
Journal Article
Lam, E. W., Chan, A. P., Olawumi, T. O., Wong, I., & Kazeem, K. O. (2023)
Facilitators and benefits of implementing lean premise design: A case of Hong Kong high-rise buildings. Journal of Building Engineering, 80, Article 108013. https://doi.org/10.1016/j.jobe.2023.108013
Defective design, poor stakeholder participation, and a mismatch between design provisions and end-user requirements cause most building construction waste. However, lean buil...
Design for Additive Manufacturing and Finite Element Analysis of Fe-Mn Biodegradable Fracture Fixation Plate with Varying Porosity Levels
Conference Proceeding
Shaikh, M., Kahwash, F., Lu, Z., Alkhreisat, M., & Shyha, I. (2024)
Design for Additive Manufacturing and Finite Element Analysis of Fe-Mn Biodegradable Fracture Fixation Plate with Varying Porosity Levels. In Industrializing Additive Manufacturing: Proceedings of AMPA2023 (239-254). https://doi.org/10.1007/978-3-031-42983-5_17
Fracture fixation plates are osteosynthesis implants used to fix fractured bones in a human body. They are either left in the body or required to be removed after a bone heali...
Carbon impact & mitigation of housing developments on peatlands in the UK - A case study
Conference Proceeding
Bernal-Sanchez, J., & Gaspari, A. (2023)
Carbon impact & mitigation of housing developments on peatlands in the UK - A case study. In Proceedings of the ISSMGE TC215 9th International Congress on Environmental Geotechnics 25-28 June 2023 (361-371). https://doi.org/10.53243/ICEG2023-216
Peatlands are a key asset in the drive to reduce annual carbon emissions due to their potential as a carbon sink. This is especially important in Scotland where 25% of the lan...
Preparation of flexible dielectric nanocomposites using nanocellulose and recycled alum sludge for wearable technology applications
Journal Article
Sun, D., Saw, L., Onyianta, A., 'rourke, Lu, Z., Wilson, C., …Shyha, I. (2022)
Preparation of flexible dielectric nanocomposites using nanocellulose and recycled alum sludge for wearable technology applications. Materials, Methods & Technologies, 16, 149-159
With the rapid development of wearable technology, flexible dielectric materials with environmental-friendly, low-cost and high-energy efficiency characteristics are in increa...
Advanced FE framework for magnetoactive polymers including viscoelastic and elastodynamics effects
Presentation / Conference
Kadapa, C., & Hossain, M. (2022, August)
Advanced FE framework for magnetoactive polymers including viscoelastic and elastodynamics effects. Paper presented at EUROMECH Colloquium on Mechanics of Soft Active Polymers, Southampton, United Kingdom
A Shed Resource: A look at Wood Recycling in the UK
Presentation / Conference
Cramer, M., & Ridley-Ellis, D. (2020, September)
A Shed Resource: A look at Wood Recycling in the UK. Paper presented at Timber 2020, Online
The secondary timber value chain was explored by interviewing companies involved in wood recycling. The interviewees include community wood recyclers, chip producers and board...
Photogrammetry method to evaluate shear modulus of laminated glass beams in torsion tests
Presentation / Conference
Uheida, K. (2019, November)
Photogrammetry method to evaluate shear modulus of laminated glass beams in torsion tests. Presented at SRPe Annual Conference 2019, Glasgow
An exhibition and demonstration at the annual Scottish Research Partnership in Engineering Conference on the use of photogrammetry and machine vision techniques to evaluate th...