Date


Download Available

41 results

Effect of pulsating flow on flow-induced vibrations of circular and square cylinders in the laminar regime

Journal Article
Wang, X., Zhang, Z., Shi, K., Zhu, X., Guo, X., Mei, Y., & Kadapa, C. (2024)
Effect of pulsating flow on flow-induced vibrations of circular and square cylinders in the laminar regime. Ocean Engineering, 301, Article 117609. https://doi.org/10.1016/j.oceaneng.2024.117609
Through fluid-structure interaction simulations, this study assesses the dynamic response characteristics of elastically mounted circular and square cylinders subjected to pul...

Curvilinear MetaSurfaces for Surface Wave Manipulation.

Journal Article
La Spada, L., Spooner, C., Haq, S., & Hao, Y. (2019)
Curvilinear MetaSurfaces for Surface Wave Manipulation. Scientific Reports, 9(1), https://doi.org/10.1038/s41598-018-36451-8
Artificial sheet materials, known as MetaSurfaces, have been applied to fully control both space and surface waves due to their exceptional abilities to dynamically tailor wav...

Metasurfaces for Advanced Sensing and Diagnostics

Journal Article
La Spada, L. (2019)
Metasurfaces for Advanced Sensing and Diagnostics. Sensors, 19(2), 355. doi:10.3390/s19020355
Interest in sensors and their applications is rapidly evolving, mainly driven by the huge demand of technologies whose ultimate purpose is to improve and enhance health and sa...

Field Based Photovoltaic Power Degradation Rates In Oman-Case Study

Conference Proceeding
Shaik, M., Gupta, N., & Goh, K. (2018)
Field Based Photovoltaic Power Degradation Rates In Oman-Case Study. In tbc
Due to increase in demand for electricity usage all around the GCC there has been emphasizing on the usage of alternative sources of energy i.e. using solar, wind and ocean et...

Modelling and control of helicopter robotic landing gear for uneven ground conditions

Conference Proceeding
Boix, D. M., Goh, K., & McWhinnie, J. (2017)
Modelling and control of helicopter robotic landing gear for uneven ground conditions. In Proceedings of 2017 Workshop on Research, Education and Development of Unmanned Aerial Systems (RED-UAS 2017https://doi.org/10.1109/RED-UAS.2017.8101644
This paper proposes a method to investigate into helicopter landing on uneven terrain by means of using a scaled articulated robotic landing gear. A mathematical model of an a...

Design considerations for high-power converters interfacing 10 MW superconducting wind power generators

Journal Article
Vedreño Santos, F., Odavic, M., Guan, Y., Azar, Z., Thomas, A., Li, G., & Zhu, Z. (2017)
Design considerations for high-power converters interfacing 10 MW superconducting wind power generators. IET Power Electronics, 10(12), 1461-1467. https://doi.org/10.1049/iet-pel.2016.0512
The design of power electronic converters for the integration of wind generated power into the grid is more and more important due to a new class of Superconducting Generators...

PV electrical parameters degradation analysis-Oman perspective

Conference Proceeding
Honnurvali, M. S., & Gupta, N. (2017)
PV electrical parameters degradation analysis-Oman perspective. In 2017 8th International Renewable Energy Congress (IREC)https://doi.org/10.1109/irec.2017.7926000
Recent interests in exploring the potential of renewable energy possibilities and readiness in sultanate of Oman has showed that it can engage renewable energy technologies, s...

Exploring multi-objective trade-offs in the design space of a waste heat recovery system

Journal Article
Mokhtar, M., Burns, S., Ross, D., & Hunt, I. (2017)
Exploring multi-objective trade-offs in the design space of a waste heat recovery system. Applied Energy, 195, 114-124. https://doi.org/10.1016/j.apenergy.2017.03.030
A waste heat recovery system (WHRS) is used to capture waste heat released from an industrial process, and transform the heat into reusable energy. In practice, it can be diff...

A Comparative Study of Methods for Modelling the Structural Stiffness of Generator Components

Conference Proceeding
Jaen-Sola, P., & Mcdonald, A. (2016)
A Comparative Study of Methods for Modelling the Structural Stiffness of Generator Components. https://doi.org/10.1049/cp.2016.0314
Direct-drive generators are low speed electrical machines requiring robust and large supporting structures designed to resist the significant loads present during assembly and...

Optimising a Waste Heat Recovery System using Multi-Objective Evolutionary Algorithm

Conference Proceeding
Mokhtar, M., Hunt, I., Burns, S., & Ross, D. (2016)
Optimising a Waste Heat Recovery System using Multi-Objective Evolutionary Algorithm. In GECCO '16 Companion Proceedings of the 2016 on Genetic and Evolutionary Computation Conference Companion (913-920). https://doi.org/10.1145/2908961.2931646
A waste heat recovery system (WHRS) on a process with variable output, is an example of an intermittent renewable process. WHRS recycles waste heat into usable energy. As an e...
8 results

Optimal and robust methodologies for nonlinear control systems with applications to the control of renewable wave-energy converters

2022 - 2023
This project is a theoretical study at the interface of mathematics and control engineering, investigating mathematical models which arise in the context of renewable wave-energy converters. Research ...
Funder: Royal Society of Edinburgh | Value: £57,568

Design model predictive control with swarm inspired MPPT algorithms to extract optimum power for a single-stage grid connected PV inverter

2022 - 2023
Brief Description This project aims to develop a control algorithm using Model predictive control with swarm-inspired MPPT algorithm for a single stage grid connected PV inverter. Single-stage PV inv...
Funder: Engineering and Physical Sciences Research Council | Value: £6,680

Novel portable aluminum-air battery: A green technology for sustainable power generation via circular economy approach

2022 - 2023
The main aim of this research is to produce a high performance portable cellulose-based aluminium-air battery. Based on this aim, several specific objectives are outlined as the following: 1. To proce...
Funder: British Council | Value: £24,020

A critical evaluation of large scale direct-drive wind turbine electrical machines manufacturing techniques considering sustainability aspects and recyclability issues

2021 - 2022
Direct-driven generators are low speed machines requiring robust and heavy supporting structures capable of withstanding a demanding set of loads. It has been reported that at least 2/3 of the total m...
Funder: Engineering and Physical Sciences Research Council | Value: £43,976

Computational analysis of a zero-carbon hydrogen fuelled thermal engine for heavy duty transport applications

2021 - 2022
Two types of transport which are currently challenging to decarbonize and electrify are heavy-duty vehicles (HDVs) and ships. HDVs and ships are predominantly powered by compression ignition (CI) engi...
Funder: Engineering and Physical Sciences Research Council | Value: £39,481

Unlock the Potential of the Rough Gas Facility with Hydrogen Storage

2021 - 2022
The proposed university-industry collaboration on modelling of hydrogen storage in Rough gas field is an innovative research directive. This would provide evidence-based decision making for the future...
Funder: Royal Academy of Engineering | Value: £42,519

Thermal Performance of Nanoguard

2017 - 2017
Developing the Nanoguard coating for use in construction and the built environment
Funder: Scottish Funding Council | Value: £4,858

Enerwater

2014 - 2018
This project involves the research and development of novel systems to recover and re-distribute energy in food processing and manufacturing premises, especially where there are demands for refrigerat...
Funder: Engineering and Physical Sciences Research Council | Value: £273,525