Facilitators and benefits of implementing lean premise design: A case of Hong Kong high-rise buildings
Journal Article
Lam, E. W., Chan, A. P., Olawumi, T. O., Wong, I., & Kazeem, K. O. (2023)
Facilitators and benefits of implementing lean premise design: A case of Hong Kong high-rise buildings. Journal of Building Engineering, 80, Article 108013. https://doi.org/10.1016/j.jobe.2023.108013
Defective design, poor stakeholder participation, and a mismatch between design provisions and end-user requirements cause most building construction waste. However, lean buil...
Collaborative Innovation: Reflections on Research for Smart Textiles in a Theatre and Performance Context
Conference Proceeding
Robertson, S., Taylor, S., & Bletcher, J. (2019)
Collaborative Innovation: Reflections on Research for Smart Textiles in a Theatre and Performance Context. https://doi.org/10.17028/rd.lboro.9741296.v1
This paper presents interdisciplinary research initiated through collaboration in the area of smart textiles, prompted by the Scottish Textile Industry’s 10-year Strategy (acc...
Experimental assessment of stiffness and damping in rubber-sand mixtures at various strain levels
Conference Proceeding
Bernal-Sanchez, J., Mcdougall, J., Barreto, D., Marinelli, A., Dimitriadi, V., Anbazhagan, P., & Miranda, M. (2019)
Experimental assessment of stiffness and damping in rubber-sand mixtures at various strain levels. In Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions, (1403-1410
The dynamic properties of shredded rubber-soil mixtures (ShRm), comprising a sub-rounded quartz sand combined with small rubber shreds at 0, 10, 20, 30% by mass, were investig...
Surface functionalisation by the introduction of self-healing properties into electroless Ni-P coatings
Journal Article
Stankiewicz, A., Kefallinou, Z., Mordarski, G., Jagoda, Z., & Spencer, B. (2019)
Surface functionalisation by the introduction of self-healing properties into electroless Ni-P coatings. Electrochimica Acta, 297, 427-434. https://doi.org/10.1016/j.electacta.2018.12.026
Ni-P∖alginate microgels coatings, as potential metallic protective coatings with self-healing properties, were deposited by the electroless method. The alginate microgels cont...
Graphene-Oxide and Hydrogel Coated FBG-Based pH Sensor for Biomedical Applications
Journal Article
Binetti, L., Stankiewicz, A., & Alwis, L. S. M. (2018)
Graphene-Oxide and Hydrogel Coated FBG-Based pH Sensor for Biomedical Applications. Proceedings, 2(13), 789. https://doi.org/10.3390/proceedings2130789
A hydrogel coated fibre grating-based pH sensor for biomedical applications has been realised, where Graphene Oxide (GO) had been used to enhance the bonding between the coati...
Investigating the fracture behavior of Portland limestone: an experimental study
Journal Article
Marinelli, A., & Stewart, M. (2018)
Investigating the fracture behavior of Portland limestone: an experimental study. Procedia Structural Integrity, 10, 104-111
An experimental investigation of the mechanical and fracture characteristics of the ‘Grove Whitbed’ Portland limestone is undertaken with the aim to enhance understanding of t...
Surface functionalisation by the introduction of self-healing properties into electroless Ni -P
Presentation / Conference
Stankiewicz, A., Kefallinou, Z., Mordarski, G., Jagoda, Z., & Spencer, B. (2018, July)
Surface functionalisation by the introduction of self-healing properties into electroless Ni -P. Poster presented at Electrochemical Methods in Corrosion Research 2018
Ni-P\alginate microgels coatings, as potential metallic protective coatings with self-healing properties, were deposited by the electroless method. The alginate microgels cont...
3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability
Journal Article
Vones, K., Allan, D., Lambert, I., & Vettese, S. (2018)
3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability. Materials Today Communications, 16, 56-59. https://doi.org/10.1016/j.mtcomm.2018.04.001
Ocean plastic pollution has been identified as one of the biggest environmental threats of our time. As large islands of plastic waste such as the Pacific Gyre amass through t...
Aqueous morpholine pre-treatment in cellulose nanofibril (CNF) production: comparison with carboxymethylation and TEMPO oxidisation pre-treatment methods
Journal Article
Onyianta, A. J., Dorris, M., & Williams, R. (2017)
Aqueous morpholine pre-treatment in cellulose nanofibril (CNF) production: comparison with carboxymethylation and TEMPO oxidisation pre-treatment methods. Cellulose, https://doi.org/10.1007/s10570-017-1631-0
In this study, pulped cellulose fibres were pre-treated with aqueous morpholine prior to mechanical disruption in the production of cellulose nanofibrils (CNF). The properties...
3D printable fillament utilising waste Scottish textiles and leather f
Physical Artefact
Vettese, S., & hindle, C. 3D printable fillament utilising waste Scottish textiles and leather f)
Vettese, S., & hindle, C. 3D printable fillament utilising waste Scottish textiles and leather f
The project team (including Colin Hindle from Advanced Materials and Research Assistant Ari Loughlin) created a prototype 3D printable filament utilising waste textiles (selve...