17 results

Actual Design Space Methodology for Preliminary Design Analysis of Switched Reluctance Machines

Journal Article
Rocca, R., Giulii Capponi, F., De Donato, G., Papadopoulos, S., Caricchi, F., Rashed, M., & Galea, M. (2021)
Actual Design Space Methodology for Preliminary Design Analysis of Switched Reluctance Machines. IEEE Transactions on Industry Applications, 57(1), 397-408. https://doi.org/10.1109/tia.2020.3038352
In the design of modern, high-performance switched reluctance machines, the highly restrictive sets of constraints and requirements severely limit the number of feasible solut...

Design Trade-Offs and Feasibility Assessment of a Novel One-Body, Laminated-Rotor Flywheel Switched Reluctance Machine

Journal Article
Rocca, R., Papadopoulos, S., Rashed, M., Prassinos, G., Giulii Capponi, F., & Galea, M. (2020)
Design Trade-Offs and Feasibility Assessment of a Novel One-Body, Laminated-Rotor Flywheel Switched Reluctance Machine. Energies, 13(22), https://doi.org/10.3390/en13225857
In a bid to respond to the challenges being faced in the installation of flywheel-based electric energy storage systems (EESSs) in customer-side facilities, namely high safety...

A One-Body, Laminated-Rotor Flywheel Switched Reluctance Machine for Energy Storage: Design Trade-Offs

Conference Proceeding
Rocca, R., Papadopoulos, S., Rashed, M., Prassinos, G., Capponi, F. G., & Galea, M. (2020)
A One-Body, Laminated-Rotor Flywheel Switched Reluctance Machine for Energy Storage: Design Trade-Offs. In 2020 IEEE International Conference on Environment and Electrical Engineering and 2020 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). https://doi.org/10.1109/eeeic/icpseurope49358.2020.9160512
A critical aspect of distributed generation systems focuses on the installation of Electrical Energy Storage Systems in customer-side facilities. In this scenario, flywheel te...

Considerations on the Development of an Electric Drive for a Secondary Flight Control Electromechanical Actuator

Journal Article
Giangrande, P., Galassini, A., Papadopoulos, S., Al-Timimy, A., Lo Calzo, G., Degano, M., …Galea, M. (2019)
Considerations on the Development of an Electric Drive for a Secondary Flight Control Electromechanical Actuator. IEEE Transactions on Industry Applications, https://doi.org/10.1109/tia.2019.2907231
The more electric aircraft concept aims to improve the fuel consumption, the weight and both the maintenance and operating costs of the aircraft, by promoting the use of elect...

Optimal Advance Angle for Aided Maximum-Speed-Node Design of Switched Reluctance Machines

Journal Article
Rocca, R., Giulii Capponi, F., Papadopoulos, S., De Donato, G., Rashed, M., & Galea, M. (2020)
Optimal Advance Angle for Aided Maximum-Speed-Node Design of Switched Reluctance Machines. IEEE Transactions on Energy Conversion, 35(2), 775-785. https://doi.org/10.1109/tec.2019.2959823
In the design processes of Switched Reluctance Machines that operate in wide constant power speed ranges, the maximum power available at maximum speed must be evaluated for ev...

Feasibility Study of Integrating Renewable Energy Generation System in Sark Island to Reduce Energy Generation Cost and CO2 Emissions

Journal Article
Robinson, S., Papadopoulos, S., Jadraque Gago, E., & Muneer, T. (2019)
Feasibility Study of Integrating Renewable Energy Generation System in Sark Island to Reduce Energy Generation Cost and CO2 Emissions. Energies, 12(24), 4722. https://doi.org/10.3390/en12244722
The island of Sark, located in the English Channel, has endured an electricity distribution crisis for the past few years, resulting in high electricity costs almost six times...

SMART: Modular Architecture for Reliable Transportation

Conference Proceeding
Papadopoulos, S., Galassini, A., Ruksnaitis, L., Farhat, N., Kiselychnyk, O., Midgley, W., & Degano, M. (2019)
SMART: Modular Architecture for Reliable Transportation. https://doi.org/10.1109/IECON.2019.8926931
This paper proposes a new ultra-reliable architecture for fully electric propulsion primarily aimed at the automotive sector. The system considers a direct drive arrangement, ...

Design of PMSM for EMA Employed in Secondary Flight Control Systems

Conference Proceeding
Giangrande, P., Al-Timimy, A., Galassini, A., Papadopoulos, S., Degano, M., & Galea, M. (2019)
Design of PMSM for EMA Employed in Secondary Flight Control Systems. https://doi.org/10.1109/esars-itec.2018.8607467
The more electric aircraft (MEA) initiative aims to improve weight, fuel consumption and maintenance costs of the aircraft, by increasing the use of electric power in actuatio...

Multi-Port Power Conversion Systems for the More Electric Aircraft

Conference Proceeding
Gu, C., Zhang, H., Buticchi, G., Sala, G., Galassini, A., Papadopoulos, S., & Degano, M. (2018)
Multi-Port Power Conversion Systems for the More Electric Aircraft. https://doi.org/10.1109/iecon.2018.8592915
In the framework of the More Electric Aircraft (MEA), weight reduction and energy efficiency constitute the key figures. In addition to these requirements, the safety and the ...

Analytical Approach for the Identification of an Optimal Design Space for Switched Reluctance Machines

Conference Proceeding
Rocca, R., Capponi, F. G., De Donato, G., Rashed, M., Papadopoulos, S., & Galea, M. (2018)
Analytical Approach for the Identification of an Optimal Design Space for Switched Reluctance Machines. https://doi.org/10.1109/icelmach.2018.8507017
This work presents a rigorous approach to simplify the design optimization process for Switched Reluctance Machines. First of all, the dimension of the Design Space is found t...
7 results

Modular Energy Storage - Challenges and opportunities

2023 - 2023
A techno-economical feasibility study aiming at identifying opportunities for energy storage in domestic and small commercial environments at a global scale. The project will identify challenges and ...
Funder: Scottish Funding Council | Value: £4,999

Modular Energy Storage for Energy Trading

2023 - 2023
The project aims at developing a configurable tool which can estimate the potential for profit based on energy storage solutions in combination with distributed generation and energy trading for domes...
Funder: Scottish Funding Council | Value: £4,999

Developing Airglove V2 Technology for Peripheral Arterial Disease Healthcare

2022 - 2023
This project was funded by IUK Fast Start grant to develop a new generation of internationally-compatible mobile Airglove power efficient device. The mobile Airglove will improve patient outcomes and ...
Funder: Innovate UK | Value: £30,340

Feasibility Study of Wireless Microwave Power Transfer

2022 - 2023
This project will carry out a feasibility study of building a simple wireless power transfer prototype. Our research team here will work with EnterGaia Technologies to develop this.
Funder: Scottish Funding Council | Value: £14,999

Electronics and Control Panels design for Airglove Arm and Leg medical products for Difficult Intravenous Access (DIVA)

2022 - 2023
Green Cross Medico would like to continue the collaboration with Edinburgh Napier University as not only do they understand the project, but they have the skills and knowledge to develop the Airglove ...
Funder: Scottish Funding Council | Value: £15,000

Portable Solar Kiln

2022 - 2022
DLT is a mass timber product that can be used for floor, wall, and roof structures. It is structurally very efficient and economical to use in construction. As part of the process to make DLT, the w...
Funder: Scottish Funding Council | Value: £4,999

IV: Airglove Leg product design for Peripheral Arterial Disease (PAD)

2022 - 2022
GCM would like to work with a specialist academic team who could analyse the product design aspect of the PAD design
Funder: Scottish Funding Council | Value: £5,000

Date


Date