6 results

Electroless Ni-P\alginate microgels coatings with self-healing properties

Conference Proceeding
Stankiewicz, A., Winiarski, J., Zielinska, K., & Barker, M. (2017)
Electroless Ni-P\alginate microgels coatings with self-healing properties. In Proceedings of EuroCorr 2017
Self-healing coatings, offering corrosion protection on an alloy steel substrate, were fabricated by electroless co-deposition of a Ni-P matrix together wit...

Enhancing the power output of moving coil actuators by incorporating soft polymers.

Journal Article
Cho, M., Barker, M., & Prokofieva, E. (2013)
Enhancing the power output of moving coil actuators by incorporating soft polymers. Sensors and Actuators A: Physical, 193, 161-169. https://doi.org/10.1016/j.sna.2013.01.018
A novel design of an actuator coupled with a low-hardness silicone elastomer called “the gel surround” is presented. It means that the output power of a conventional moving co...

Development of self-healing coatings for corrosion protection on metallic structures

Journal Article
Stankiewicz, A., & Barker, M. B. (2016)
Development of self-healing coatings for corrosion protection on metallic structures. Smart Materials and Structures, 25(8), 084013. https://doi.org/10.1088/0964-1726/25/8/084013
Inspired by biological systems, artificial self-healing materials are designed for repairing local damage caused by external factors. The rapidly expanding field of self-heali...

On the Influence of Surfactant Incorporation during Electroless Nickel Plating

Journal Article
Nwosu, N., Davidson, A., Hindle, C., & Barker, M. (2012)
On the Influence of Surfactant Incorporation during Electroless Nickel Plating. Industrial & engineering chemistry research, 51(16), 5635-5644. https://doi.org/10.1021/ie202625n
The effects of surfactants on the dynamics and characteristics of plain and composite electroless nickel plating (ENP) are highlighted and discussed herein. An outline of the ...

Improvement of Sound Quality by Means of Ultra-Soft Elastomer for the Gel Type Inertia Driven DML Type Transducer.

Conference Proceeding
Cho, M., Prokofieva, E., Munoz, J. & Barker, M. (2010)
Improvement of Sound Quality by Means of Ultra-Soft Elastomer for the Gel Type Inertia Driven DML Type Transducer
Unlike standard DML transducers, the gel-type inertia driven transducer (referred to as the gel transducer in this paper) designed as a mini woofer DML-type transducer, transf...

A Novel Design for a Gel-Type DML Transducer Incorporating a Solid Panel Projecting Multiple Independent Sound Sources.

Conference Proceeding
Cho, M., Prokofieva, E., Barker, M. & Munoz, J. (2010)
A Novel Design for a Gel-Type DML Transducer Incorporating a Solid Panel Projecting Multiple Independent Sound Sources
The gel-type DML transducer (referred to as the gel transducer in this paper) excites a panel to radiate sound waves through the gel surround. The panel breaks into different ...

Date


18 results

The development and analysis of conductive nonwoven carbon fibre veils for electromagnetic shielding applications

2008 - 2010
Electromagnetic interference (EMI) is a growing problem in the modern world and as the ...
Andrew Austin | Director of Studies: Mike Barker | Second Supervisor: John Sharp

The effect of injection mould surface finish on the ejection of plastics product

2005 - 2014
The development and fabrication injection of moulding tools is complex and demands highly skilled personal. The research...
Alias Mohd | Director of Studies: Colin Hindle | Second Supervisor: Mike Barker

Development of gel-based panel loudspeakers

2002 - 2012
Jordi Munoz-Frigola | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Fabrication and characterisation of planar and tubular solid oxide fuel cell anodes

2010 - 2013
Yanzhao Zhang | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

A study of the powder processing, tribological performance and metallurgy of aluminium-based, discontinuously reinforced metal matrix composites

1998 - 2002
The principal objectives of the research reported in thi...
Colin Mitchell | Director of Studies: Alan Davidson | Second Supervisor: Janos Hajto

The manufacture of gas turbine compressor components by Metal Injection Moulding

2011 - 2015
Andrew Russell | Director of Studies: Mike Barker | Second Supervisor: Alan Davidson

A review and investigation of the chemical mechanical planarisation of thin silicon dioxide films

1999 - 2002
Richard Coull | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Conductively filled poly(methyl methacrylate) composites: manufacture, and testing processes for EMI shielding effectiveness

2006 - 2012
Jonathan Smuga | Director of Studies: Mike Barker | Second Supervisor: Alan Davidson

Development of a new manufacturing method of electrodes for solid oxide fuel cells

2005 - 2010
William Waugh | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Processing, characterisation and durability of tubular solid oxide fuel cell cathodes

2010 - 2015
Dong Wang | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Date


Date