52 results

The suitability of home grown timber for construction

Other
Ridley-Ellis, D. (2020)
The suitability of home grown timber for construction. https://www.confor.org.uk/media/2678074/ftn-dec-20.pdf
Dan Ridley-Ellis, Edinburgh Napier University, debugs myths about the quality of home-grown, construction-grade timbers.

Some awkward questions about density

Conference Proceeding
Ridley-Ellis, D., & Cramer, M. (2020)
Some awkward questions about density. In Timber 2020 Conference Proceedings. , (99-110
There are several different concepts of wood density, such as specific gravity, basic density, dry density, and oven dry density. These are often confusing, and sometimes poor...

Analysis of a wooden specimen's mechanical properties through acoustic measurements in the very near field

Journal Article
Pantelić, F., Mijić, M., Šumarac Pavlović, D., Ridley-Ellis, D., & Dudeš, D. (2020)
Analysis of a wooden specimen's mechanical properties through acoustic measurements in the very near field. Journal of the Acoustical Society of America, 147(4), EL320-EL325. https://doi.org/10.1121/10.0001030
This paper presents the method for prediction of some basic mechanical parameters of a wood specimen by using simple instrumentation. The standard acoustic method for assessme...

The Mechanical and Resonance Assessment of Large Clear Samples of UK-Grown Beech Wood

Journal Article
Ridley-Ellis, D. (2019)
The Mechanical and Resonance Assessment of Large Clear Samples of UK-Grown Beech Wood. Pro Ligno, 15(4), 32-39
The paper presents the results of non-destructive longitudinal resonance (impulse excitation technique), and mechanical flexural testing, of a batch of European beech wood (Fa...

Grading of British spruce cladding battens by ring width for density, fastener performance and fire

Conference Proceeding
Ridley-Ellis, D. (2019)
Grading of British spruce cladding battens by ring width for density, fastener performance and fire. In Proceedings of the 15th Annual Meeting of the Northern European Network for Wood Science and Engineering
The UK has a British Standard for external timber cladding, BS8605-1, in which support battens are defined as timber components of a section, grade, and durability, suitable f...

Influence of knot area indexes on tension strength of Sitka spruce

Conference Proceeding
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2019)
Influence of knot area indexes on tension strength of Sitka spruce. In Proceedings of the 15th Annual Meeting of the Northern European Network for Wood Science and Engineering
It is well known that knots can reduce the strength of timber, and the selection of “critical section” for testing to EN 408 and EN 384 is typically based on the size and posi...

The use of a visual grading code of practice in the UK in the assessment of the mechanical properties of in situ structural timber elements

Conference Proceeding
Bather, M. J., & Ridley-Ellis, D. J. (2019)
The use of a visual grading code of practice in the UK in the assessment of the mechanical properties of in situ structural timber elements. In SHATiS 2019: 5th International Conference on Structural Health Assessment of Timber Structures (89-98
The estimation of the mechanical properties of in situ timber elements is an essential part of the structural appraisal of many existing buildings and structures. Currently, i...

Use of Nondestructive Techniques for Determination of Tension Parallel-to-Grain Properties of Spruce

Conference Proceeding
Gil-Moreno, D., O'Ceallaigh, C., Ridley-Ellis, D., & Harte, A. M. (2019)
Use of Nondestructive Techniques for Determination of Tension Parallel-to-Grain Properties of Spruce. In Proceedings: 21st International Nondestructive Testing and Evaluation of Wood Symposium, Freiburg, Germany 2019 (233-240
The paper presents a study of the tension properties of Irish-grown Sitka spruce. Fifty timber pieces were destructively tested having resonant frequency and knots measured. T...

Quantification of chemical changes taking place in spruce wood structure following long period thermal treatment

Presentation / Conference
Popescu, C., Ridley-Ellis, D., & Popescu, M. (2019, August)
Quantification of chemical changes taking place in spruce wood structure following long period thermal treatment. Paper presented at 2DCOS-10, The 10th International Symposium on Two-dimensional Correlation Spectroscopy, Changchun, China
Wood is a natural composite polymer containing different amounts of cellulose, lignin and hemicelluloses and some other low molecular compounds (i.e. extractives). Due to its ...

Timber grading potential of Douglas fir in the Republic of Ireland and the UK

Journal Article
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. (2019)
Timber grading potential of Douglas fir in the Republic of Ireland and the UK. International Wood Products Journal, 10(2), 64-69. https://doi.org/10.1080/20426445.2019.1617984
Results of the recently approved machine control grading settings for Douglas fir in the Republic of Ireland and the UK have shown that the species can be graded to C18, and h...
15 results

An easier route for strength grading UK hardwoods

2023 - 2026
The project aims to improve grading options for home-grown hardwoods, with a more cost-effective route to establishing grading and easier to apply visual grading rules for producers. Properties of thr...
Funder: Scottish Forestry Trust | Value: £35,000

Building From England's Woodlands

2022 - 2025
The focus of the project is to develop 5 building system concepts through innovative digital design, adapted to the characteristics of 5 underutilised home-grown English timber species. Each project s...
Funder: Forestry Commission England | Value: £109,975

SIRT 2021-2022 (WP1&2)

2021 - 2022
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £165,522

SIRT 2020-2021 (WP1&2)

2020 - 2021
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £165,472

SIRT 2019-20 (WP1&2)

2019 - 2020
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £96,000

InFutUReWood

2019 - 2022
Timber and construction research
Funder: European Commission | Value: £122,942

SIRT 2018-19 (WP1&2)

2018 - 2019
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £99,000

SIRT WP2 2017-18

2017 - 2018
Timber grading standards support ensuring standards are good for the domestic timber industries, and supporting industry in using them
Funder: Scottish Forestry | Value: £42,500

SIRT WP1 2017-18

2017 - 2018
Applied research and knowledge transfer addressing industry needs – as set out by the SIRT management board. This includes providing information and advice to industry sponsors
Funder: Scottish Forestry | Value: £107,500

Appearance grading Scots pine timber for joinery

2016 - 2017
This one year project will undertake a literature review and physical testing of Scots pine logs and boards. The aim of the project is to develop a predictive model of the knot characteristics of boar...
Funder: The Research Funding Council of Norway | Value: £28,000