BM TRADA Webinar Part 2: Machine Strength Grading
Presentation / Conference
Ridley-Ellis, D. (2024, April)
BM TRADA Webinar Part 2: Machine Strength Grading. Presented at BM TRADA Technical Timber Webinars 2024, Online
Strength grading of solid timber – overcoming some common misconceptions.
Slides covering machine strength grading, stamps, and EN1912 revision
The Challenge of Strength Grading UK Hardwoods
Journal Article
Cramer, M. (in press)
The Challenge of Strength Grading UK Hardwoods. Bulletin of the Transilvania University of Brasov. Series II: Forestry, Wood Industry, Agricultural Food Engineering, 16(65)(3), 39-52. https://doi.org/10.31926/but.fwiafe.2023.16.65.3.3
Recent research in Europe is bringing a wider range of wood species to the construction market as structural timber and glue laminated products. This option would also open ma...
Models to predict the radial variation of stiffness, strength, and density in planted noble fir, Norway spruce, western hemlock, and western red cedar in Great Britain
Journal Article
Gil-Moreno, D., MClean, J. P., & Ridley-Ellis, D. (2023)
Models to predict the radial variation of stiffness, strength, and density in planted noble fir, Norway spruce, western hemlock, and western red cedar in Great Britain. Annals of Forest Science, 80, Article 48. https://doi.org/10.1186/s13595-023-01214-7
Key message: This study compares the measured radial variation in wood stiffness, strength, and density of noble fir, Norway spruce, western hemlock, and western red cedar by ...
Wood properties & strength grading
Presentation / Conference
Ridley-Ellis, D. (2022, December)
Wood properties & strength grading. Presented at James Jones & Sons Architects' and Structural Engineers' Open Day, Lockerbie
James Jones & Sons held an open day for architects and structural engineers at its flagship sawmill site in Lockerbie.
"James Jones & Sons' new visitor building at its flags...
The relationship between bending and tension strength of Irish and UK spruce and pine
Journal Article
Gil-Moreno, D., Ridley-Ellis, D., O'Ceallaigh, C., & Harte, A. M. (2022)
The relationship between bending and tension strength of Irish and UK spruce and pine. European Journal of Wood and Wood Products, 80, 585-596. https://doi.org/10.1007/s00107-022-01787-6
The correct characterisation of wood properties is fundamental for the best utilisation of resources. In Europe, grading is defined by strength classes that are determined bas...
Test Machine Effect in the determination of modulus of elasticity for strength-graded timber
Conference Proceeding
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2021)
Test Machine Effect in the determination of modulus of elasticity for strength-graded timber. In WCTE 2021: World Conference on Timber Engineering Proceedings
This paper investigates if the relationship between the global and local moduli of elasticity (MoE), measured in bending tests, is affected by the test machines employed, and ...
Alternative UK timber species
Book Chapter
Adams, S., & Ridley-Ellis, D. (2021)
Alternative UK timber species. In Timber 2021 Industry Yearbook (104-111). High Wycombe: TRADA
Steven Adams and Dan Ridley-Ellis discuss the findings of a recent research project into the properties and potential uses of lesser-used species in the UK.
A brief look at alternative species in the UK
Conference Proceeding
Adams, S. H., & Ridley-Ellis, D. J. (2021)
A brief look at alternative species in the UK. In Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020 (68-70
A case study of timber demolition recycling in the UK
Conference Proceeding
Cramer, M., & Ridley-Ellis, D. (2021)
A case study of timber demolition recycling in the UK. In Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020 (89-91
Influence of knot area indexes on tension strength of Sitka spruce
Conference Proceeding
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2019)
Influence of knot area indexes on tension strength of Sitka spruce. In Proceedings of the 15th Annual Meeting of the Northern European Network for Wood Science and Engineering
It is well known that knots can reduce the strength of timber, and the selection of “critical section” for testing to EN 408 and EN 384 is typically based on the size and posi...