Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system
Journal Article
Moncaster, A., Pomponi, F., Symons, K., & Guthrie, P. (2018)
Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system. Energy and Buildings, https://doi.org/10.1016/j.enbuild.2018.05.039
Life Cycle Assessment (LCA) is increasingly used as an early-stage design-decision tool to support choices of structural system. However LCA modellers must first make numerous...
Impulse excitation measurement of small changes in elastic moduli and damping using R
Journal Article
Ridley-Ellis, D., Libeau, M., & Mignerat, D. (2018)
Impulse excitation measurement of small changes in elastic moduli and damping using R. International Wood Products Journal, 1-6. https://doi.org/10.1080/20426445.2018.1475928
Impulse excitation is commonly used to assess wood stiffness in both scientific and industrial settings. Modes of vibration are excited by a mechanical impulse and their reson...
Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK
Journal Article
Pomponi, F., & D'Amico, B. (2018)
Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK. Procedia CIRP, 69, 189-193. https://doi.org/10.1016/j.procir.2017.10.007
The circular economy has set out a new paradigm for a much
needed shift from eco-efficiency to eco-effectiveness. Buildings are top contributor globally for resource use and w...
Sustainability tool to optimise material quantities of steel in the construction industry
Journal Article
D'Amico, B., & Pomponi, F. (2018)
Sustainability tool to optimise material quantities of steel in the construction industry. Procedia CIRP, 69, 184-188. https://doi.org/10.1016/j.procir.2017.10.006
The steel industry is arguably one of the most pollutant manufacturing sectors. The vast majority of steel produced worldwide is employed by the construction industry, mostly ...
Building as we did in the past is not sustainable and needs to change
Other
Pomponi, F. (2018)
Building as we did in the past is not sustainable and needs to change
No abstract available.
Numerical investigation for optimizing segmented micro-channel heat sink by Taguchi-Grey method
Journal Article
Naqiuddin, N. H., Saw, L. H., Yew, M. C., Yusof, F., Poon, H. M., Cai, Z., & Thiam, H. S. (2018)
Numerical investigation for optimizing segmented micro-channel heat sink by Taguchi-Grey method. Applied Energy, 222, 437-450. https://doi.org/10.1016/j.apenergy.2018.03.186
• Novel segmented micro-channel heat sink has been designed. • CFD models have been developed to simulate the performance of the segmented micro-channel. • Enhanced the coolin...
TG1/201804/25rev Derivation of MTG grading machine settings for Douglas fir (IE & GB, C classes)
Report
Ridley-Ellis, D., & Gil-Moreno, D. (2018)
TG1/201804/25rev Derivation of MTG grading machine settings for Douglas fir (IE & GB, C classes). WoodProps for Ireland project
Grading machines
MTG 960
mtgBATCH 962 mtgBATCH 966
MTG 920
mtgBATCH 922
mtgBATCH 926
Douglas fir (Pseudotsuga menziesii)
(PSMN)
Permitted timber sizes
Thickness: 33 mm to 84...
The merits of varying forms of mass timber products for offsite and modular construction
Conference Proceeding
Hairstans, R., Smith, R., & Wilson, P. (2018)
The merits of varying forms of mass timber products for offsite and modular construction
Mass timber is a family of Solid Laminate Timber Systems (SLTS) formed from smaller sections of timber connected by glue, mechanical fixings, moisture movement or a combinatio...
Mass Customisable Roofing Solutions for the New Build and Retrofit Markets in the UK
Conference Proceeding
Plowas, W., Hairstans, R., & Felingham, J. (2018)
Mass Customisable Roofing Solutions for the New Build and Retrofit Markets in the UK. In MOC Summit Proceedings
Major house builders and contractors in the UK are seeking alternative solutions to form the structural frame of pitched roofs for various reasons; speed, health and safety, q...
Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design
Journal Article
D’Amico, B., & Pomponi, F. (2018)
Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design. Energy and Buildings, 168, 236-250. https://doi.org/10.1016/j.enbuild.2018.03.031
Building structures often represent the element with the largest mass in a building project, with significant effects on the buildings life cycle environmental impacts. Amongs...