Staff directory

Search for a surname in the box below and then click "Search" to search for Staff. 

If you want to get in touch but you don’t know who to contact, fill in our enquiry form and one of our advisers will get back to you as soon as possible.

Date


Download Available

38 results

Investigating the fracture behavior of Portland limestone: an experimental study

Journal Article
Marinelli, A., & Stewart, M. (2018)
Investigating the fracture behavior of Portland limestone: an experimental study. Procedia Structural Integrity, 10, 104-111
An experimental investigation of the mechanical and fracture characteristics of the ‘Grove Whitbed’ Portland limestone is undertaken with the aim to enhance understanding of t...

Surface functionalisation by the introduction of self-healing properties into electroless Ni -P

Presentation / Conference
Stankiewicz, A., Kefallinou, Z., Mordarski, G., Jagoda, Z., & Spencer, B. (2018, July)
Surface functionalisation by the introduction of self-healing properties into electroless Ni -P. Poster presented at Electrochemical Methods in Corrosion Research 2018
Ni-P\alginate microgels coatings, as potential metallic protective coatings with self-healing properties, were deposited by the electroless method. The alginate microgels cont...

3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability

Journal Article
Vones, K., Allan, D., Lambert, I., & Vettese, S. (2018)
3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability. Materials Today Communications, 16, 56-59. https://doi.org/10.1016/j.mtcomm.2018.04.001
Ocean plastic pollution has been identified as one of the biggest environmental threats of our time. As large islands of plastic waste such as the Pacific Gyre amass through t...

Aqueous morpholine pre-treatment in cellulose nanofibril (CNF) production: comparison with carboxymethylation and TEMPO oxidisation pre-treatment methods

Journal Article
Onyianta, A. J., Dorris, M., & Williams, R. (2017)
Aqueous morpholine pre-treatment in cellulose nanofibril (CNF) production: comparison with carboxymethylation and TEMPO oxidisation pre-treatment methods. Cellulose, https://doi.org/10.1007/s10570-017-1631-0
In this study, pulped cellulose fibres were pre-treated with aqueous morpholine prior to mechanical disruption in the production of cellulose nanofibrils (CNF). The properties...

Schmuckmachen im 21. Jahrhundert

Exhibition / Performance
Vones, K. Schmuckmachen im 21. Jahrhundert. Exhibited at Vienna. 5 October 2017 - 12 November 2017. (Unpublished)

)
Vones, K. Schmuckmachen im 21. Jahrhundert. Exhibited at Vienna. 5 October 2017 - 12 November 2017. (Unpublished
This exhibition took place in Gallery V&V in Vienna and was curated by Birgit Laken and Anarkik3D founder Ann Marie Shillito on a theme od 3D printed jewellery

Electroless Ni-P\alginate microgels coatings with self-healing properties

Conference Proceeding
Stankiewicz, A., Winiarski, J., Zielinska, K., & Barker, M. (2017)
Electroless Ni-P\alginate microgels coatings with self-healing properties. In Proceedings of EuroCorr 2017
Self-healing coatings, offering corrosion protection on an alloy steel substrate, were fabricated by electroless co-deposition of a Ni-P matrix together wit...

3D printable fillament utilising waste Scottish textiles and leather f

Physical Artefact
Vettese, S., & hindle, C. 3D printable fillament utilising waste Scottish textiles and leather f

)
Vettese, S., & hindle, C. 3D printable fillament utilising waste Scottish textiles and leather f
The project team (including Colin Hindle from Advanced Materials and Research Assistant Ari Loughlin) created a prototype 3D printable filament utilising waste textiles (selve...

In vivo in uterus non-invasive methods to predict placental insufficiency and adverse pregnancy outcomes in antiphospholipid syndrome

Conference Proceeding
Girardi, G., Fraser, J., Bertolaccini, M. L., Lennen, R., Vontell, R., & Hutchison, G. (2014)
In vivo in uterus non-invasive methods to predict placental insufficiency and adverse pregnancy outcomes in antiphospholipid syndrome. https://doi.org/10.1016/j.placenta.2014.06.184
Objectives: To use MRI-based methods to non invasively detect placental insufficiency and predict fetal outcomes in obstetric antiphospholipid syndrome (APS) Methods and resul...

Stand-up comedy for researchers

Book Chapter
Ridley-Ellis, D. (2014)
Stand-up comedy for researchers. In I. Daly, & A. Brophy Haney (Eds.), 53 interesting ways to communicate your research, 57-58. The Professional and Higher Partnership Ltd
Effective researchers need both to conduct high-quality research and to communicate it - to subject specialists, researchers in other fields, research participants, business, ...

Design and Acoustic Performance of Building Constructions for Multi-Storey Housing: Compendium.

Book Chapter
Fausti, P., García, T. C., Ingelaere, B., Machimbarrena, M., Monteiro, C. R. A., Santoni, A., …Smith, S. (2014)
Design and Acoustic Performance of Building Constructions for Multi-Storey Housing: Compendium. In B. Rasmussen, & M. Machimbarrena (Eds.), COST Action TU0901 – Building acoustics throughout Europe. Volume 1: Towards a common framework in building acoustics throughout Europe, 213-244. COST European Cooperation in Science and Technology
This chapter provides an overview of the range of construction types found across Europe to meet various sound insulation requirements for separating (party) walls and floors....
24 results

Higher-Order Shell Finite Elements for Morphoelastic Shells

2023 - 2025
The aim of this project is to develop state-of-the-art shell finite element models for computational morphoelasticity for modelling the deformation behaviour and pattern formation due to growth (or at...
Funder: Royal Society | Value: £5,794

Novel portable aluminum-air battery: A green technology for sustainable power generation via circular economy approach

2022 - 2023
The main aim of this research is to produce a high performance portable cellulose-based aluminium-air battery. Based on this aim, several specific objectives are outlined as the following: 1. To proce...
Funder: British Council | Value: £24,020

Sintering improvement and electrical property tuning of lead-free AgNbO3-based ceramics for energy storage applications

2022 - 2023
With the environment and climate degrading, it is critical to accelerate the development of reliable energy storage equipment to enable the continued use of renewable energy. Dielectric capacitors are...
Funder: Royal Society | Value: £19,009

PiezoACT membranes: Piezo-Active Nanofibrous Self-decontaminating Facemasks/Filters using Solution Blow Spinning in Egypt

2022 - 2022
Due to the outbreak of COVID-19 pandemic, facemasks have been in short supply in particular for health care workers who should be fully safeguarded to protect health system from being overwhelmed. The...
Funder: British Council | Value: £79,920

Development of improved nanocellulose based rheology modifiers for personal care products

2021 - 2021
With an ever increasing push towards sustainability and environmentally friendly products, Unilever is actively evaluating bio-based functional materials for use in Home and Personal Care products (HP...
Funder: University of Stratchlyde (Industrial Biotechnology Innovation Centre) | Value: £24,828

Shinty Caman

2021 - 2021
Interface request The ancient art of making shinty sticks – or camans – in Scotland is under threat of dying out. Investigate the required properties and characterise the properties of Shinty stick...
Funder: Scottish Funding Council | Value: £5,000

Seaweed CNF reinforced composites for cycle seat padding

2021 - 2021
This is for an Innovation voucher to enable comparative testing of seaweed CNF based composites with existing silicone based material used in seat padding for cycling. The industrial partner is Endura...
Funder: Scottish Funding Council | Value: £13,058

An Innovative Method for Producing Ultra-High Elastic Piezoelectric Nanofibrous Composites Layers using Solution-Blowing Technique

2020 - 2021
The project has an ambitious aim to develop an innovative semi-industrial system based on a solution-blowing spinning (SBS) technique to produce ultra-high elastic piezoelectric (UHEP) nano-structures...
Funder: British Council | Value: £59,479

Nanocellulose arabica gum composites

2019 - 2020
This project will cast films from a nanocellulose (CNF) composite with arabica gum. Arabica gum will be added at different loading concentrations and composites will be assessed for general appearanc...
Funder: Scottish Funding Council | Value: £5,000

CupClean - fast coffee cup cleaner

2019 - 2019
This project is to assist in the research of cleaning coffee cups to a standard acceptable for public use. The research will be used in the development of a product that can be installed in office sp...
Funder: Scottish Funding Council | Value: £4,958
6 results

Cyclic performance of rubber-soil mixtures to enhance seismic protection

2015 - 2020
The main aim of the project seeks to enhance the resistance of the soil foundation against seismic events with the introduction ...
Dr Juan Bernal-Sanchez | Director of Studies: Dr John McDougall | Second Supervisor: Dr Daniel Barreto Gonzalez

Impact of climate change and envelope performance dilapidation on dwellings

2012 - 2019
"This study looks at addressing the issues concerning environmentally conscious homes and reviewing how efficiently they comp...
Dr Julio Bros Williamson | Director of Studies: Prof John Currie | Second Supervisor: Dr Celine Garnier

Photogrammetric and stereo vision techniques for evaluating material properties in timber and timber-based composite structures

2010 - 2016
Dr Ahmed Mohamed | Director of Studies: Prof Johnson Zhang | Second Supervisor: Prof Abdy Kermani

Moisture conditions in external timber cladding: field trials and their design implications

2004 - 2011
This research was funded by the EU Northern Periphery Programme as part of a trans-national project titled: E...
Dr Ivor Davies | Director of Studies: Charles Fairfield | Second Supervisor: Alastair Stupart

The Toxicological Effects of PM10 Components On Lung Cells

2001 - 2004
Prof Gary Hutchison

Novel Processing and Characterisation of Anodes for Solid Oxide Fuel Cells (SOFCs)

2001 - 2007
Solid oxide fuel cells are an important strand of future energy provision, offering high efficiency, compactness and ...
Dr Neil Shearer | Director of Studies: Alan Davidson | Second Supervisor: Janos Hajto